Remote Control (3ft)

This is hands down our favorite Helmet Cam accessory. With our Remote Control plugged into your camcorder’s LANC port, you can turn on/off your camcorder at will, start/stop recording in "play/edit" mode, and be warned when you are running out of tape...all in a tiny one button package. Our Remote Control allows you to stretch the times between tape changes by eliminating much of the down time that unnecessarily eats up tape space.

  **Note: Will work with most LANC equipped camcorders (i.e. Sony and Cannon).
***Only controls the camcorder in "Play/Edit" mode, not in "camera" mode.

Waterproof Remote Control:
Submergible - sealed from water/dust

LANC through the 10pin Adapter Cable

Have you bought a new Sony camcorder and found out your LANC remote no longer works? Not to worry, Xtreme Recall has the cable you need. This brand new adapter has a right angle Sony 10pin on one end and a female 2.5mm on the other, just plug in your LANC remote and you can control your camcorder again. Standard length is 12 inches and available in any direction you desire, Right angle; left, right, up, down or straight

Our exclusive LANC through the 10pin Sony adapter cable is also available with A/V output(s) (additional charges apply). Another XR exclusive, this adapter cable will allow remote viewing as well as control of the camcorder. You can watch video through a secondary screen or watch full signal (a/v) remotely. Standard length is 12 inches with a right angle Sony 10pin terminating to a female 2.5mm and a single RCA (video).

Custom lengths and configurations available via the custom shop  775-851-2686.

Remote Extension Cable (3.3ft)

Used for extending the distance between any LANC remote and your recorder. Particularly useful when storing the recorder far from your body (i.e. rear of a vehicle).