16mm Helmet Mount   (4 bases included)

When you absolutely need the smallest and lightest weight mount – you want our Low Speed Helmet Mount. With only a 1 x 3 inch contact patch, this is as small as it gets.

19mm Speed Helmet Mount   (4 bases included)

Our favorite helmet mount. When the wind speed is below 100 mph, this is the ideal mount for your application. Fits virtually all helmets/headgear, adaptable to goggle mounting, and ideally sized for attachment to shooting or aviation earmuffs. If you only had one bullet camera mount in this world, this is the mount you would choose.

21mm Helmet Mount   (4 bases included)

Our most secure helmet/fairing/body panel mount. When the mission requires the firmest possible mounting of the micro-camera to a helmet or fairing, you want our high speed mount. Ultra light-weight, yet still easily attachable/detachable.

This mount is compatible with all 19-21mm micro-cameras and makes an excellent upgrade to most systems offered by other companies

Headband

The Xtreme Recall headband mount is perfect for recording activities where you don’t use a helmet. Our headband will comfortably hold the mini-camera in position while still being soft to the touch and non-binding on the skin. The headband can be used with bandanas and most hats/caps. Ski type beanies also work particularly well.

Adhesive Bases for Helmet Mount (set of 4)

Insure the highest level of performance by using only these Xtreme Recall approved Adhesive Bases when mounting your micro-camera to a number of different helmets, fairing locations, body panels, etc.

Vehicle Mount Set (Basic)

Easily convert any of our camera systems into an In-Car Camera System by simply buying this Mount set. Our Vehicle Mount is based on a "ball and socket" design which allows almost infinite angle adjustability. Vibration dampening is achieved though a combination of rubber coated ball joints, rock solid design and high quality construction.

New for 2007, we have further improved this mounts xtreme low temperature performance to a range typically not considered possible with suction bases. Also new is an improved industrial grade suction cup with locking-ring (much stronger than simple “push to stick” designs).
 

Suction Cup Base – Industrial strength suction cup base for non-permanent mounting/removal on any smooth, rigid surface. Excellent as an easily removable windshield mount.

**Note: This mount set is intended for use with micro-cameras and isn’t suitable for holding a camcorder.

Vehicle Mount Set (Standard)

Easily convert any of our camera systems into an In-Car Camera System by simply buying this Mount set. Our Vehicle Mount is based on a "ball and socket" design which allows almost infinite angle adjustability. Vibration dampening is achieved though a combination of rubber coated ball joints, rock solid design and high quality construction.

New for 2007, we have further improved this mounts xtreme low temperature performance to a range typically not considered possible with suction bases. Also new is an improved industrial grade suction cup with locking-ring (much stronger than simple “push to stick” designs).

**This set has everything included in our Minimal Set, but also includes a role bar base for additional flexibility in mounting options.

Suction Cup Base – Industrial strength suction cup base for non-permanent mounting/removal on any smooth, rigid surface. Excellent as an easily removable windshield mount.

Roll-Bar Base – For use with metal tubing between ½ - 2 inches in diameter. This is a professional grade mount for race cars, four-wheelers or boaters. Easily attach or remove the Vehicle Mount from this base in just seconds.

**Note: This mount set is intended for use with micro-cameras and isn’t suitable for holding a camcorder.

Vehicle Mount Set  (Deluxe)

Easily convert any of our camera systems into an In-Car Camera System by simply buying this Mount set. Our Vehicle Mount is based on a "ball and socket" design which allows almost infinite angle adjustability. Vibration dampening is achieved though a combination of rubber coated ball joints, rock solid design and high quality construction.

New for 2007, we have further improved this mounts xtreme low temperature performance to a range typically not considered possible with suction bases. Also new is an improved industrial grade suction cup with locking-ring (much stronger than simple “push to stick” designs).

**This set has everything included in our Minimal Set and Standard Set, but also includes a multifunction base for additional flexibility in mounting options.

Suction Cup Base – Industrial strength suction cup base for non-permanent mounting/removal on any smooth, rigid surface. Excellent as an easily removable windshield mount.

Roll-Bar Base – For use with metal tubing between ½ - 2 inches in diameter. This is a professional grade mount for race cars, four-wheelers or boaters. Easily attach or remove the Vehicle Mount from this base in just seconds.

Multifunction Base – Superior for rigid mounting needs. This base uses 3M adhesive that semi-permanently attaches this low profile base to any smooth surface. Screw holes are provided as well in case you need the maxim adhesion. Once the base is positioned you can easily attach or remove the Vehicle Mount in just seconds.

**Note: This mount set is intended for use with micro-cameras and isn’t suitable for holding a camcorder.

Vehicle Mount Arm (2 inch)

A component of our Vehicle Mount, this is the part that connects the Micro-Camera Ball to the mount base (attached to your vehicle). This arm is made of high strength plastic in order to reduce weight and vibration.

* Purchase as a spare or extra, this is already included in all of our Vehicle Mount Sets.

Vehicle Mount Camera Ball

A component of our Vehicle Mount, this is the part that actually connects to the micro-camera. Part of our ball and socket design, the ball is rubber coated to reduce vibration.

* Purchase as a spare or extra, this is already included in all of our Vehicle Mount Sets.

Vehicle Mount Suction-Cup Base

New for 2007 we have improved this Pro level base by improving it’s low temperature performance to a range typically not considered possible with suction bases. Also new is a industrial grade locking-ring design (much stronger than simple “push to stick” models).

* Purchase as a spare or extra, this is already included in all our Vehicle Mount Sets.

Vehicle Mount Roll-Bar Base

For use with metal tubing between ½ - 2 inches in diameter. This is a professional grade mount for race cars, four-wheelers or boaters. Once this base is in position you can easily attach or remove the Micro Camera Ball and Arm in just seconds. All contact surfaces are rubber coated to significantly reduce vibration.

* This is already included in our Standard and Deluxe Vehicle Mount Sets.

Vehicle Mount Multifunction Base  (1 pad included)

Superior for rigid mounting needs. This base uses a 3M adhesive pad that semi-permanently attaches this low profile base to any smooth surface. Screw holes are provided as well in case you need the maxim adhesion. Once this base is in position you can easily attach or remove the Micro-Camera and Arm in just seconds.

* This is already included in our Deluxe Vehicle Mount Set.