Remote Control (3ft)

This is hands down our favorite Helmet Cam accessory. With our Remote Control plugged into your camcorder’s LANC port, you can turn on/off your camcorder at will, start/stop recording, and be warned when you are running out of tape.. all in a tiny one button package. Our Remote Control allows you to stretch the times between tape changes by eliminating much of the down time that unnecessarily eats up tape space.

  **Note: Will work with most LANC equipped camcorders, i.e. Sony and Cannon

Waterproof Remote Control:
Submergible - sealed from water/dust

Vehicle Mount Set (Basic)

Easily convert any of our camera systems into an In-Car Camera System by simply buying this Mount set. Our External Mount is based on a "ball and socket" design which allows almost infinite angle adjustability. With vibration dampening, this Vehicle Mount set is perfect for on-track, off road, street/drifting.. anything.
 

Suction Cup Base – Industrial strength suction cup base for non-permanent mounting/removal on any smooth, rigid surface. Excellent as an easily removable windshield mount.

**Note: This mount set is intended for use with micro-cameras and isn’t suitable for holding a camcorder.

Li-Ion Battery Set (with universal wall charger and car charger)

Simply the smallest, most advanced battery system currently available to power a helmet camera or in-car video system.

• Smallest/lightest currently available

• 1800mah 3 x cell configuration (30% more run time)

• LED fuel gauge

• 7+ hours continuous run time

• On/Off switch

• Over-charge and reverse polarity protection built in

• Ruggedized for vibration and hard use

• Option available for direct connect (no battery cable needed)

• Weight: 6 oz. (175g)

• Dimensions (Inches): L x 3.875in  W x 2.25in  H x 1in

• Dimensions in (Centimeters): L x 9.7cm  W x 5.6cm  H x 2.5cm

Intelligent Charger Features:

• Light weight design

• 4 hour "quick charge" feature

• World power compatible (auto switching)

• Interchangeable plugs for US/UK/AU/EU compatibility

• Car cigarette charger included

Extra External batteries (without the
(universal wall/car chargers)

Power off the Camcorder (POC)

Special Sony compatible batteries that work with all models using Sony’s P, M or F series Li-ions. These extended life batteries will power both your camcorder and your XR helmet cam system, increasing usability and comfort while recording. Eliminate the need for an external battery - just attach our POC battery to the camcorder, charge it as you would your standard Sony battery, plug in our system and you’re ready to go.
Other optional uses:
Increase your camcorder’s run time - just leave our system unplugged and you have an extended life battery to power your handheld video.
Get even more run time from your helmet cam by using it as an external battery - power your camcorder with your existing camcorder batteries and plug the XR system into the POC, giving you 6+ hours of power to the helmet cam.

Specifications:

• Replaces Sony NP-FP90 (P), NP-FM70 (M), or NP-FF70 (F)

• Lithium-ion

• Rugged cabling

• Light weight, heavy duty housing

• 2250mAh / 7.2v

• Dimensions: 45mm x 45mm x 30mm (P)

• Weight: Approx 5oz or 118 grams (P)

• Operating Temperature : +0° to +40°C (+32° to +104°F)

• Length of pigtail cable: 12mm (including connector)

Notes:

• Use with Xtreme Recall micro cams purchased in December 2006 or later.

• Helmet cam will continue to draw power if connected to power source, to obtain maximum run time please unplug the XR system when not in use.

AA Battery Holder

Rechargeable batteries are nice, but sometimes it is helpful to have a battery pack that uses standard (AA or AAA) Alkaline batteries. Fill with off-the-shelf batteries or NiMH rechargeable batteries and know that no matter where you are in the world, you can still power your hands-free camera system even though you can’t get to a wall socket to recharge your regular battery pack. We include the stick shaped 8 AA battery holder in all of our systems.

• 6+ hours continuous run time with 8 AA Alkaline batteries

• 12+ hours continuous run time with 8 AA NiMH rechargeable batteries

Dual Mic Cable Harness

Using a proprietary 3rd Generation design, our cable harness is 50% lighter in weight than our competitors' designs, significantly more rugged, less bulky and infinitely easier to use. True 3^rd Gen design means there are only three connectors, period. This even applies to new Sony camcorder users as we can provide the special right-angle 10 pin connector you need directly on the harness – alleviating the necessity for extra adapters and that silly AV cable you need to use with every other design offered today.

Dual, independently positional waterproof microphones gives you crisp stereophonic sound and we do not use any heavy coiled cables or brass waterproof connectors in our design

Microphones:

• Superb Stereophonic audio recording

• True "zero connector" design

• Waterproof (submergible)

• Independently positional per activity requirements

• Wind noise reducing design

• Reinforced (ruggedized) mic body

• Redundant audio for xtreme environmental recordings

• 3ft (1m) cable lead on each microphone

Cable Harness:

• Still the smallest. lightest, "no adapter" configuration available today

• No heavy "coiled cables" used

• Waterproof quick-disconnect with locking ring (submergible)

• True "three connector" design

• Sony Right-Angle AV available, for new camcorder models

* This cable harness is of Xtreme Recall’s proprietary design and is not compatible with our competitors' camera systems. Only use with Xtreme Recall’s advanced micro-cameras or competitor cam systems that have been upgraded by our Custom Shop.

Adhesive Bases for Helmet Mount (set of 4)

Insure the highest level of performance by using only these Xtreme Recall approved Adhesive Bases when mounting your micro-camera to a number of different helmets, fairing locations, body panels, etc.

Xtreme Pack

After years of testing just about every backpack on the market, we think this special pack is the ideal choice for hands-free video use. This isn’t your regular sport model Camelbak - it is a special model developed for elight Special Forces. Prime benefits: exceptional rip/tear resistance, quite zippers and a streamlined design that offers a full range of movement. When used in conjunction with either of our Specialty Foam camcorder impact protectors (CIP), this pack system offers considerable protection for both you and your camcorder.  

• Includes the OMEGA Reservoir – without a doubt the finest water reservoir made today.
• Dimensions: 19 in x 12 in x 6 in (482 mm x 304 mm x 152 mm)

• Volume: Cargo Only – 1100 cu. in. (18.0 l) ~ Including Water – 1280 cu. in. (20.9 l)
• Weight: Empty Reservoir – 2.60 lbs (1.18 kg) ~ Filled Reservoir – 8.85 lbs (4.01 kg)

  * Available in Olive Green, Woodland or Desert camouflage (special order)  

Low-Profile Pack (with specialty foam)

When the situation requires the smallest possible profile, and the probability of falling or crashing isn’t likely, our Low Profile Pack is the carrier you will want most. Slim and ultra close riding to the body – our Low Profile Pack is so small and light you will forget you are wearing a camera the minute the action starts.

This is the Camelbak Stealth pack (designed for the military) and includes a special foam insert to offer vibration protection to your recorder and some extra measure of protection to you in the event of a fall/roll over. Extremely popular with tactical teams, Pro paintball players and anyone needing a super comfortable, close fitting carrier that will not hinder your range of movement.

*This pack makes an excellent upgrade to your existing helmet cam system.

580Q Sony ExView Color Micro-Camera (3rd generation)

This is not your average “580 bullet camera”. Simply put, this is the finest Professional Grade micro-camera we know how to make.

Our flag ship model, this 580 cam was specifically designed to deliver the highest possible video quality in the broadest range of lighting conditions. The video quality is razor sharp - only about a click off from normal camcorder quality.

Being an Xtreme Recall product, you know we also reduced everything into the smallest size/weight technically possible today and maximized ruggedness by adding these additional exclusive features:

• Perplex shatter resistant front lens (not glass)

• Optical anti-scratch coating on front of lens

• Vacuum sealed for anti-fogging

• Polycarbonate "quick-disconnect" (submergible)

• 6v - 15v, the widest power band in the world

• Reinforced Internal components (improved shock limit)

Important features include:

• 1/3" Sony ExView imager
• Special shatter resistant lens (Perplex)
• Scratch resistant lens coating
• Superb low light performance (.5 Lux)
• Built in UV filtering
• Waterproof (submergible)
• Anti-Fogging (vacuum sealed)

• Waterproof  (submergible) “quick-disconnect” with locking ring. Injection molded - NOT BRASS
• Widest power flexibility in the industry (6-15v)
• Reverse polarity protection
• Low reflection Black color body (not silver)
• Highest resolution in the smallest size/weight available: 
  21mm Diameter, 72mm (2.75 inch) long, view a comparison

480 Sony ExView Color Micro-Camera (3rd generation)

We originally developed this unique micro-camera for the Army. But it has since become quite popular with Motocross riders, Snow boarders, Skiers.. anyone who needs the maximum in anti-vibration performance.

Physics states reducing vibration is a two part problem: good mount design + reduce camera/mount mass. At only 19mm x 60mm, and an almost weightless 44gr, this is easily the smallest/lightest Sony 1/3 ExView cam in existence today.

We recommend this micro-camera for all Military/Tactical/SWAT use, applications where vibration suppression is paramount or if you need the smallest possible camera size and frontal surface area.

Ruggedized for military and hard trail use, all Xtreme Recall micro-cameras come with these unique features:

• Perplex shatter resistant front lens (not glass)

• Optical anti-scratch coating on front of lens

• Vacuum sealed for anti-fogging

• Polycarbonate "quick-disconnect" (submergible)

• 6v - 15v, the widest power band in the world

Important features include:

• 1/3" Sony ExView imager
• Special 19mm OD design
• Special shatter resistant lens (Perplex)
• Scratch resistant lens coating
• Built in UV filtering
• Waterproof (submergible)
• Anti-Fogging (vacuum sealed)

• Waterproof  (submergible) “quick-disconnect” with locking ring. Injection molded - NOT BRASS
• Widest power flexibility in the industry (6-15v)
• Reverse polarity protection
• Low reflection Black color body (not silver)
• The worlds smallest/lightest waterproof High-Res micro-cam: 
  19mm Diameter, 65mm long, 45g   view a comparison

420 Line Color Micro-Camera (3rd generation) *PAL ONLY

Using the same 19mm tube developed for the 480 Superlight (above), our 420 Superlight bridges the gap between genuine Pro Level ruggedness, size, weight and easy of use.. but at a more afford price.

In fact, the only difference between our 420 and 480 Superlight models is we use a lower resolution Sony 1/3” SuperHAD CCD in the 420 instead. That’s it. Everything else is still Professional Grade.

This micro-camera is a superb choice for “occasional use” enthusiasts, home/family or anyone needing the lowest cost possible without giving up audio and ease of use performance. This configuration is fully upgradeable; simply replace the micro-camera with one of our top-end models later. Everything else is the same.

Exclusive Xtreme Recall features: 

• Perplex shatter resistant front lens (not glass)

• Optical anti-scratch coating on front of lens

• Polycarbonate "quick-disconnect" (submergible)

• 6v - 12v, the widest power band in the world

* Available only in PAL models - Sorry we have sold out of the US standard NTSC

Important features include:

• 1/3" Sony SuperHAD imager
• Special shatter resistant lens (Perplex)
• Scratch resistant lens coating
• Built in UV filtering
• Waterproof (submergible)

• Waterproof  (submergible) “quick-disconnect” with locking ring. Injection molded - NOT BRASS
• Widest power flexibility in the industry (6-15v)
• Reverse polarity protection
• Low reflection Black color body (not silver)
• The worlds smallest, lightest, waterproof 420tvl micro-cam: 
  19mm Diameter, 65mm long, 45g   view a comparison

Dual Mic Cable Harness

Using a proprietary 3rd Generation design, our cable harness is 50% lighter in weight than our competitors' designs, significantly more rugged, less bulky and infinitely easier to use. True 3^rd Gen design means there are only three connectors, period. This even applies to new Sony camcorder users as we can provide the special right-angle 10 pin connector you need directly on the harness – alleviating the necessity for extra adapters and that silly AV cable you need to use with every other design offered today.

Dual, independently positional waterproof microphones gives you crisp stereophonic sound and we do not use any heavy coiled cables or brass waterproof connectors in our design

Microphones:

• Superb Stereophonic audio recording

• True "zero connector" design

• Waterproof (submergible)

• Independently positional per activity requirements

• Wind noise reducing design

• Reinforced (ruggedized) mic body

• Redundant audio for xtreme environmental recordings

• 3ft (1m) cable lead on each microphone

Cable Harness:

• Still the smallest. lightest, "no adapter" configuration available today

• No heavy "coiled cables" used

• Waterproof quick-disconnect with locking ring (submergible)

• True "three connector" design

• Sony Right-Angle AV available, for new camcorder models

* This cable harness is of Xtreme Recall’s proprietary design and is not compatible with our competitors' camera systems. Only use with Xtreme Recall’s advanced micro-cameras or competitor cam systems that have been upgraded by our Custom Shop.

Single Mic Cable Harness

A second single mic cable harness is often a good thing to have as either a back-up replacement (in case you damage your primary mic/harness) or if you want to have two different carriers ready to go at a moments notice.

Employing only the highest grade components, this harness is exactly the same as our Dual Mic harness (above) but with one microphone instead.

Microphones:

• Ultra small and virtually weightless

• True "zero connector" design

• Waterproof (submergible)

• Independently positional per activity requirements

• Wind noise reducing design

• Reinforced (ruggedized) mic body

• 3ft (1m) cable lead on each microphone

Cable Harness:

• Still the smallest. lightest, "no adapter" configuration available today

• No heavy "coiled cables" used

• Waterproof quick-disconnect with locking ring (submergible)

• True "three connector" 3rd Gen design

• Sony Right-Angle AV available, for new camcorder models

* This cable harness is of Xtreme Recall’s proprietary 3rd Generation design and is not compatible with our competitors' camera systems. Only use with Xtreme Recall’s advanced micro-cameras or competitor cam systems that have been updated by our Custom Shop.

Right Angle 10pin Adapter Cable

This is what you need to make "the other guys" work with our right angle 10pin. Since we don't know what system you have, make sure to choose the exact connectors you will need. Look at your helmet cam setup, if you only use one microphone on your system then you want only 2 RCA connectors (audio/video). If you order 3 RCA connectors in this configuration, you will end up with a bulkier adapter cable yet only one speaker having audio during playback. When you order only 2 RCA connectors we will merge your left/right audio together in the adapter so we will fill both speakers with sound automatically. Only order an adapter cable with 3 RCAs  if you are using a dual microphone setup, or otherwise have a unique requirement you know needs independent audio channels.

Some points to make note of:

• This is not a “hack” job product. Each is manufactured, by hand, from an original raw OEM connector. Production time can be up to 1 week.

• Instead of RCA’s, this 10pin adapter can also be supplied to terminate to male/female 3.5mm or any combination of RCA connectors. Please make sure you are ordering the correct style.

• Due to component availability, we can not guarantee specific colors for the RCA connector moldings.

• Total adapter lengths vary, but usually fall around 1 foot. For an additional $15 charge we can custom make the cable anywhere from 6 inches to 3 feet, please note your preferred length in the cart and the additional charge will be added when shipped.

• The orientation of the right-angle 10pin is specific to your camcorder model. One reason we still hand make these adapters is it allows us to ideally configure to your particular camcorder model. Make sure to list your Sony model when ordering, if not listed the connector may end up blocking another port (i.e. your LANc remote port).

Remote Control (3ft)

This is hands down our favorite Helmet Cam accessory. With our Remote Control plugged into your camcorder’s LANC port, you can turn on/off your camcorder at will, start/stop recording, and be warned when you are running out of tape.. all in a tiny one button package. Our Remote Control allows you to stretch the times between tape changes by eliminating much of the down time that unnecessarily eats up tape space.

  **Note: Will work with most LANC equipped camcorders, i.e. Sony and Cannon

Waterproof Remote Control:
Submergible - sealed from water/dust

Micro-Camera Extension Cable (4.5ft)

Used for extending the distance between an Xtreme Recall 3rd Generation micro-camera and your recorder. Particularly useful when mounting our micro-camera to your windshield - while storing the recorder in the rear of the vehicle. Great for large SUV’s, RV’s, boats or any time you want the camera a considerable distance from the recorder.

Low Speed Helmet Mount   (4 bases included)

When you absolutely need the smallest and lightest weight mount – you want our Low Speed Helmet Mount. With only a 1 x 3 inch contact patch, this is as small as it gets. Designed specifically for Pro Paintball masks.

This mount is compatible with all 19-21mm micro-cameras and makes an excellent upgrade to most systems offered by other companies

Medium Speed Helmet Mount   (4 bases included)

Our favorite helmet mount. When the wind speed is below 100 mph, this is the ideal mount for your application. Fits virtually all helmets/headgear, adaptable to goggle mounting, and ideally sized for attachment to shooting or aviation earmuffs. If you only had one bullet camera mount in this world, this is the mount you would choose.

This mount is compatible with all 19-21mm micro-cameras and makes an excellent upgrade to most systems offered by other companies

High Speed Helmet Mount   (4 bases included)

Our most secure helmet/fairing/body panel mount. When the mission requires the firmest possible mounting of the micro-camera to a helmet or fairing, you want our high speed mount. Ultra light-weight, yet still easily attachable/detachable.

This mount is compatible with all 19-21mm micro-cameras and makes an excellent upgrade to most systems offered by other companies

Vehicle Mount Set (Basic)

Easily convert any of our camera systems into an In-Car Camera System by simply buying this Mount set. Our Vehicle Mount is based on a "ball and socket" design which allows almost infinite angle adjustability. Vibration dampening is achieved though a combination of rubber coated ball joints, rock solid design and high quality construction.

New for 2007, we have further improved this mounts xtreme low temperature performance to a range typically not considered possible with suction bases. Also new is an improved industrial grade suction cup with locking-ring (much stronger than simple “push to stick” designs).
 

Suction Cup Base – Industrial strength suction cup base for non-permanent mounting/removal on any smooth, rigid surface. Excellent as an easily removable windshield mount.

**Note: This mount set is intended for use with micro-cameras and isn’t suitable for holding a camcorder.

Vehicle Mount Set (Standard)

Easily convert any of our camera systems into an In-Car Camera System by simply buying this Mount set. Our Vehicle Mount is based on a "ball and socket" design which allows almost infinite angle adjustability. Vibration dampening is achieved though a combination of rubber coated ball joints, rock solid design and high quality construction.

New for 2007, we have further improved this mounts xtreme low temperature performance to a range typically not considered possible with suction bases. Also new is an improved industrial grade suction cup with locking-ring (much stronger than simple “push to stick” designs).

**This set has everything included in our Minimal Set, but also includes a role bar base for additional flexibility in mounting options.

Suction Cup Base – Industrial strength suction cup base for non-permanent mounting/removal on any smooth, rigid surface. Excellent as an easily removable windshield mount.

Roll-Bar Base – For use with metal tubing between ½ - 2 inches in diameter. This is a professional grade mount for race cars, four-wheelers or boaters. Easily attach or remove the Vehicle Mount from this base in just seconds.

**Note: This mount set is intended for use with micro-cameras and isn’t suitable for holding a camcorder.

Vehicle Mount Set  (Deluxe)

Easily convert any of our camera systems into an In-Car Camera System by simply buying this Mount set. Our Vehicle Mount is based on a "ball and socket" design which allows almost infinite angle adjustability. Vibration dampening is achieved though a combination of rubber coated ball joints, rock solid design and high quality construction.

New for 2007, we have further improved this mounts xtreme low temperature performance to a range typically not considered possible with suction bases. Also new is an improved industrial grade suction cup with locking-ring (much stronger than simple “push to stick” designs).

**This set has everything included in our Minimal Set and Standard Set, but also includes a multifunction base for additional flexibility in mounting options.

Suction Cup Base – Industrial strength suction cup base for non-permanent mounting/removal on any smooth, rigid surface. Excellent as an easily removable windshield mount.

Roll-Bar Base – For use with metal tubing between ½ - 2 inches in diameter. This is a professional grade mount for race cars, four-wheelers or boaters. Easily attach or remove the Vehicle Mount from this base in just seconds.

Multifunction Base – Superior for rigid mounting needs. This base uses 3M adhesive that semi-permanently attaches this low profile base to any smooth surface. Screw holes are provided as well in case you need the maxim adhesion. Once the base is positioned you can easily attach or remove the Vehicle Mount in just seconds.

**Note: This mount set is intended for use with micro-cameras and isn’t suitable for holding a camcorder.

Vehicle Mount Arm (2 inch)

A component of our Vehicle Mount, this is the part that connects the Micro-Camera Ball to the mount base (attached to your vehicle). This arm is made of high strength plastic in order to reduce weight and vibration.

* Purchase as a spare or extra, this is already included in all of our Vehicle Mount Sets.

Vehicle Mount Camera Ball

A component of our Vehicle Mount, this is the part that actually connects to the micro-camera. Part of our ball and socket design, the ball is rubber coated to reduce vibration.

* Purchase as a spare or extra, this is already included in all of our Vehicle Mount Sets.

Vehicle Mount Suction-Cup Base

New for 2007 we have improved this Pro level base by improving it’s low temperature performance to a range typically not considered possible with suction bases. Also new is a industrial grade locking-ring design (much stronger than simple “push to stick” models).

* Purchase as a spare or extra, this is already included in all our Vehicle Mount Sets.